STARBLAZE 45G01 ACID ZIRCONIUM PUTTY
Description:
StraBlaze 45G01 is a zirconium fortified ceramic epoxy putty used for protection against erosive wear & repair / rebuilding of worn-out components. The coating offers excellent sag & shrinkage resistance.
- Ash handling pipes and valves.
- Sand pumping equipment.
- Pipe elbows, chutes for clinker, cement & sand.
- Pump housing, impellers, lining.
- Coal pulverizes and exhausters' slurry pumps.
- Screw conveyors.
Applications Areas:
Application thickness may differ from job to job hence prior plan is needed for application of this product. Better the surface preparation and base primer, better the results. Thickness may vary from 3mm to 10mm depending upon intended use. Sometimes glass woven roving/Kevlar is recommended for thickness built up and enhanced mechanical strength
| Product Name | STARBLAZE 45G01 ACID ZIRCONIUM PUTTY |
|---|---|
| Compressive Strength | 1300 Kg/ Sq.cm ASTM D 695 |
| Coverage | One Sq.Mtr per four kgs @2000 microns DFT |
| Cure Time | 24 hrs (Forced curing is recommended for certain applications) |
| Cured Hardness (Shore D) | 8-9 |
| Dielectric Strength | 30Kv/mm ASTM D 149 |
| Mix Ratio by Weight | 4:1 |
| Pot Life @ 30° C | 30 min. |
| Recoat Time | 4-6 hrs |
| Solids by Volume | 100 |
| Specific Gravity | 2 (Approx) |
| Temperature Resistance | 150° C (1800C intermittent) |
| Abrasion Resistant per 1000 cycles | <10mg ASTM D 4060 |
Excellent.